18
2 VEHICLE OPERATION
Your remotes have the ability to control a second vehicle with a Crimestopper system installed.
To set up the 2-Vehicle operation you must first program your remotes to Vehicle #2. Follow the “Transmitter
Programming” steps (Pg. 15) at the second vehicle and learn YOUR remote, along with vehicle #2’s existing
remotes.
2-VEHCLE NOTES:
(1) You do not have to switch between Vehicle “1” and “2” to get pages from each vehicle. Your remote pager
will receive pages from both cars regardless of which vehicle the pager is set to. The “1” or “2” icon will always
display with each page indicate which vehicle the page originated from.
(2) All 1-Way and 2-Way Pagers for that vehicle must be learned at the time of programming (up to 4). When you
program your remote at the second vehicle, that vehicle’s original remote must also be programmed. Your remote
should be set in Vehicle “2” and the vehicle’s original remote should be set in Vehicle “1”.
VEH 1 / VEH 2
CLOCK SET
Push 2 Seconds
to change from
Vehicle 1 to 2
VEHICLE 1 = GREEN LED
VEHICLE 2 = RED LED
Push 2 Seconds
to change from
Vehicle 1 to 2
VEHICLE SELECT
Push VEH Button 5
Times to set Clock
VEHICLE 1 = 1 - 1
VEHICLE 2 = 2 - 1
1-Way FM REMOTE
LCD REMOTE
VEH
1-Way AM REMOTE
VEHICLE 1 = BLUE LED
VEHICLE 2 = RED LED
Note: Use can use Vehicle 2 Mode to turn off remote if there is no system installed in a 2
nd
vehicle.
AM SYSTEMS:
Option 27-1 must be selected for 2-Vehicle Mode
VEHICLE
ICON
