multifunction button.
The multifunction button allows
you to answer, end or reject a
call, as well as make a redial to
the last number dialed on the
smartphone.
To answer or end a call, simply
press the multifunction button.
If there is an incoming call,
pressing it will accept the call.
If the call is already in progress,
pressing the button will finish
it. To reject a call press the
multifunction button for 2
seconds or reject from your
smartphone.
To repeat the last call recorded
on the smartphone, double click
on the multifunction button..
How to charge the
internal battery?
Insert the microUSB connector
of the charging cable into
the microUSB port of the
CoolBox Intrauricular (turn
off the headphones before
charging). Then connect the
USB connector on the opposite
end of the charging cable to
a free USB port on a running
computer or to a USB port on a
USB charger. The indicator LED
will glow red during charging.
Once the charge is completed,
the LED will glow blue.
Note:
: It is convenient to charge
the battery before using the
headphones for the first time.
Although it is probable that
the battery has charge when
removing the headphones from
its box, this load will only be
partial, so from the beginning
they will not offer the autonomy
announced in the first use if it
does not previously complete
the load. With low battery the
red light flashes twice.
Specifications
- Bluetooth: Bluetooth v4.2
- Transmission frequency:
2.4GHz
- Supported protocols: HFP,
HSP, A2DP and AVRCP
- Scope: 10 meters
- Frequency range: 20Hz ~
20kHz
- Sensitivity: 96.7dB + - 3dB
- Speaker (diameter): 2 x 8mm
- Impedance: 16 Ohm + - 15%
- Battery: Internal, lithium, non-
removable, 80mAh
- Charging time: Less than 2
hours
- Autonomy (reproduction): 4
hours (approx.)
- Autonomy (StandBy): 160
hours (approx.)
- Controls: Play / Pause /
Forward / Backward,
and Volume-
- Weight: 15 g.
Problem solving
It does not turn on: Recharge
the CoolBox intra-earphones
using the microUSB cable
The music we are playing on a
Bluetooth device is not heard:
- Check if both devices (player
and headphones) are on, paired
and connected via Bluetooth.
- Restart the intra-auricular to
force the reconnection.
The Bluetooth device does not
reconnect to the headset: Enter
the device configuration menu,
locate the CoolBox intra-clinic
in the list and select “Forget”.
Now follow again the steps
indicated above to pair the
device to the headphones.
Security
Read carefully the following
instructions for your safety
and prevention of damage:
- Do not use the headphones
for long periods of time at high
volume.
- Do not use the product in
extreme heat or cold, dust or
humidity.
- Avoid friction with hard
objects and do not deposit it on
abrasive surfaces.
- Avoid that the product falls
from a high place, since the
