10
USBG-232FT-1 – PRODUCT MANUAL
www.coolgear.com
2.
Uninstalling Windows 7 or Vista Drivers
Windows 7 and Vista have many new security features. You need to proceed with the
following steps to uninstall the Vista driver:
1.
The USB to serial devices must connect to the PC.
2.
Press “Start” button and select “Control Panel”.
3.
Select “Classic View” from the top left hand corner and then “System” from the
list.
4.
Select “Device Manager” from the top left hand corner.
Figure 8
5.
Locate your Device under the Ports (COM & LTP) section and right click on it to
bring up the menu shown.
Figure 9
