W
ireless
D
igital
M
icroscope 2.4GHZ
2 Connect the signal receive base to the PC, after connected, the
indicator light on.
LED
indicator
USB port
Wireless Signal Receive Base
3 If the transmitter indicator stops blink, and lights on all the time, it
means the signal connected already. Then you can continue to
operate in relative software.
Hardware system requirements
Windows 2000
、
XP
、
VISTA
、
WIN7
Pentium 1G, Celeron, AMD 1G &
above, 128MB Memory, 150MB Hard Disc memory space,16-bit &
above VGA ,CD-ROM, USB2.0 or USB1.1.
How to install the Software
S05 Wireless Digital Microscope is a Free Driver product, it can be worked
immediately after connected to the computer with operation system above
win2000 version. Detailed operation procedures as below:
1. Connect the receiver base to the computer, turn on the microscope, the
signal will connect automatically, after the receiver base indicator light
stops blink, it means the signal have been connected. Then, click and
open “My Computer” , below interface will shown up.
Double click the USB
Video device
as above red marked in your
computer. Now it is ready to use.
6/22
confidential
confidential
