What Makes CoolMate Great?
It creates a microscopic mist so ultra-fine it evaporates almost immediately
once in contact with the breeze of the fan. CoolMate misting heads are
dripless making the fans suitable for indoor use.
Do not tamper with or remove mist head.
Doing so may cause permanent damage. If mist head becomes damaged
beyond repair, DO NOT return product to store. Please call Toll Free: U.S.
and Canada 1-866-793-7874.
Is your fan NOT creating mist?
It may be for one of the following reasons:
1.
Water level too low
SOLUTION:
When water level reaches approx.
5%, the misting function will stop automatically to protect the mist head. Please
refill fan’s internal water tank and re-push HI or LOW mist setting.
2.
Air lock
SOLUTION:
If fan previously ran out of water before the
misting function was turned OFF, an air lock may have formed in the system. To
remedy, gently but firmly shake the fan to unblock the water passages.
3.
Water tank is empty
SOLUTION:
Refill tank using funnel-fliter
supplied with your fan. DO NOT over fill.
4.
Mineral deposit on Nano-Mist Generator misting head
SOLUTION:
Gently swab misting head with ONLY cotton tip swab dipped in
commercial solutions noted for removing mineral deposits (e.g. CLR) or plain
white vinegar. Repeat gentle swabbing several times for thorough cleaning.
Basic Trouble Shooting
Unit #18, 170 Wilkinson Road, Brampton, Ontario CA, L6T 4Z5
2-In-1 Ocsillating Fan
Basic Parts/Operation
Basic Parts/Operation
1.
OSCILLATION Setting:
Press for ON, press again for OFF
2.
LOW MIST setting:
6-second mist control (mist on for 2
seconds, off for 6 seconds)
3.
HI MIST setting:
2-second mist control (mist on for 2 seconds,
off for 2 seconds)
4.
SPEED setting:
Press once for LOW, press twice for HIGH, press
3 times for OFF
5.
Refilling Cap
(Add water until full directly through the (supplied)
funnel-filter into the fan’s internal water tank. DO NOT spill water on the
fan motor. DO NOT submerge fan to refill. UNPLUG fan when refilling
6.
Misting Head
( the Nano-Mist Generator misting head is
computer controlled,
DO NOT TOUCH
and please handle with care )
7.
AC Power
cord direct connection 110V, 6 ft. (1.8 m) length
8.
Pole Top “Clip-mount”
Slide and lock fan to stand
9.
Up/Down Twist-control
for adjusting stand height
10.
Floor stand base unit
secures with single screw (supplied)
8
9
10
7
DO NOT ADD OILS TO INTERNAL
WATER TANK – APPLY ONLY TO
AROMATHERAPY ATTACHMENT
UNIQUE!
Aromatherapy
Create a scented and relaxing
cool and refreshing breeze
Add drops of your favorite
Essential Oils (e.g. Lavender) to
create a cool and scented
theraputic breeze.
Here’s how to do it ...
6
1.
Turn fan OFF
2.
Remove Attachment
from
back of fan and add several
drops of your favourite
Essential Oil to the fabric
3.
Return Attachment
to
back of fan and
turn fan ON
Important!
3
4
5
IMPORTANT
Note:
attach
pole to base
with screw (supplied)
Add water until full directly through the (supplied)
funnel-filter into the fan’s internal water tank. DO
NOT spill water on the fan motor. DO NOT sub-
merge fan to refill. UNPLUG fan when refilling
1
2
11
11.
Funnel-Filter
filters tap water for refilling fan’s internal water tank
Toll Free: U.S. and Canada
1-866-793-7874
Email: Customerservice@coolmatefans.com
CoolMate’s secret is its patented
“Nano-Mist Generator” misting
head with hundreds of tiny holes
controlled by a micro-chip.
Need Assistance or Replacement Parts?
Call Us First!
