background image

 

REFRIGERATOR SAFETY

 

 

Your safety and the safety of others are very important. 

 

We have provided many important safety messages in this manual for your appliance. Always read 
and obey all safety messages. 
 
  
                                    This is the Safety Alert Symbol. This symbol alerts you to potential hazards that 

 can kill or injure you and others. All safety messages will follow the Safety 
 Alert Symbol and either the words 

” DANGER”, “WARNING” or “CAUTION”. 

 
 

 

 

                                                                                           Danger means that failure to heed this 

safety statement may result in severe 
personal injury or death. 

 
 
                                                                                            Warning means that failure to heed this 

safety statement may result in extensive 
product damage, serious personal injury, or 
death. 

 
 
                                                                                             Caution means that failure to heed this 

safety statement may result in minor or 
moderate personal injury, property or 
equipment damage. 

 
All safety messages will alert to know what potential hazard is, tell you how to reduce the chance of 
injury, and let you know what can happen if the instructions are not followed. 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Summary of Contents for CMST40













Reviews: