8
10
．
Install the upper hinge cover (6) on the upper hinge.
1Screw
2 Lower hinge
3 Leveling legs
4 Leveling legs
5 Upper hinge
6 Upper hinge cover
7 Hole cover plate
8 opposite two holes
OPERATING YOUR UNIT
➢
Setting the Temperature Control
▪
The temperature control is located at the rear bottom corner of the appliance.
▪
The first time you turn the unit on set the temperature control to the maximum position, using a
coin or flathead screwdriver.
▪
The range of the temperature control is from position" 1" the warmest to “6” the coldest. After 24
to 48 hours, adjust the temperature control to the setting that best suits your needs. The setting
of “3~4” should be correct for home or office freezer use.
NOTE: If the unit is unplugged, power lost, or turned off; you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the freezer will not start.
