Transportation and Handling
For safe lifting, tilt the appliance backwards by no more than 45 degrees, hold the
base and rear corners of cabinet. Lift the refrigerator carefully. To move the
refrigerator on a flat level surface, tilt it slightly backwards and push backwards.
This unit is heavy and could cause injury – ensure there are adequate people
present to move the appliance.
Installing and Switching on Your Appliance
•
Operating voltage for your appliance is 230-240V at 50Hz.
•
Before plugging in the power supply, ensure that the voltage on the rating label
corresponds to the working voltage of the electrical system in your home.
•
Insert the plug into an approved Earth connection. If the socket has no Earth
contact or the plug does not match, we suggest you call an authorised electrician for
assistance.
•
Place your appliance in an area that is not exposed to direct sunlight.
•
Your appliance should be placed at least 10cm away from stoves, ovens and other
heating sources.
•
This appliance should never be used outdoors or left in the rain.
•
When your appliance is placed next to a chest freezer or freezer, there should be at
least 10cm between them to prevent humidity on the outer surface.
•
Do not place anything on top of your appliance and install the unit in a suitable place,
so that there is at least 30cm clearance above it.
•
If placing your appliance next to cabinets, leave 5cm between them.
•
The rear of the appliance should be at least 6cm away from the back wall.
•
The appliance must be used in the vertical position and on a flat surface.
•
To level the appliance, use the adjustable feet on the appliance.
•
Do not place your appliance on a carpeted surface as this will prevent adequate
ventilation.
For Customer Services & Spare Parts please call 0161 772 5666
Opening times: Monday - Friday 9am – 4pm
or visit us at
www.coolmed.co.uk
5
