background image

P56

P57

This  warranty  is  limited  to  cover  any  defective  parts  of  original  purchaser  of  MAXTRADE 

LLC(here refer as MAXTRADE) for 90 days from the date of MAXTRADE,S sales invoice and does 

not cover common wear items such as blades, belts, tines, tires etc, MAXTRADE reserves the 

right to inspect any equipment or parts, which are claimed to have been defective in ,material 

or workmanship.

This warranty does not apply to any parts or product which in MAXTRADE,S judgment shall 

have been misused or damaged by accident or lack of normal maintenance or care ,or used as 

rental or racing or ride abuse or altered in a way which adversely affects its performance or 

reliability, or which has been used for a purpose for which the product is not designed, Misuse 

also specifically includes failure to properly maintain oil levels, grease points, and drive line 

shafts ,MAXTRADE reserves the right to make changes in materials or design of the product at 

any time without notice,

This warranty shall not be interpreted to render MAXTRADE liable for damages of any kind , 

direct ,consequential, or contingent to property,

Furthermore , MAXTRADE shall not be liable for damages resulting from any cause beyond its 

reasonable control ,This warranty does not extend to loss of any expense or loss for labor 

,towing ,shipping charges incurred, supplies, and rental machinery or for any other reason.

MAXTRADE does not reimburse any labor cost, However MAXTRADE does provide free labor 

on  defective  motors  and  installation  of  defective  parts  that  are  still  under  their  specified 

warranty period in its own facility.
The following items are not covered:

Blades tires, tines rims , body panels ,fuses, forks ,shocks, gaskets, light bulbs, seats ,CV Boots, 

oil filter, fuel filter, filters, clutch wear parts, cables, drive belt, chain, spark plug, any part made 

from rubber, belts, brake linings and /or pads, batteries, sprockets, external springs, clips, nuts, 

bolts and fasteners.

Engine case will be covered only if damaged caused by internal mechanical failure lubricated 

components.
Warranty  claim procedure:

●1)Customers needs to fill out the RMA form. From line: www.coolster.com/rma-information. 

html.

●2)Call for a RMA Number (626)-228-0251- RMA Department

●3)Ship the defective parts with the copy of your original invoices and the RMA form you filled 

out.

●4)Ship to:

MAXTRADE LLC(RMA Department)
9436 RUSH ST
SOUTH MONTE,CA 91733

MAXTRADE LLC,S WARRANTY POLICY 

FOR ON AND OFF ROAD MOTORCYCLES,ATVS, SUV AND GO-KARTS

●5)After receiving the parts ,MAXTRADE will be do an inspection and other necessary steps 
to repair, rebuild or replace warranty part and send them back to customer.      

WHY WE NEED YOU TO SEND PARTS BACK?

●We need to verify your replacement part is the correct one to send you.
●We  require  the  part  back  so  we  may  monitor  defective  parts  and  notify  the  correct 
manufacture of potential future problems or recalls.
●We need to verify that your part in fact defective ,Many times receive parts that are not 
defective at all.

SHIPPING AND HANDLING CHARGES:(S/H CARGES)

Within in warranty period customer pays S/H charge to MAXTRADE facility and MAXTRAD 
will pay return shipping to customer unless it is determined the part was abused, misused or 
damaged in any way other, than a manufacturers defect, Customer needs to pay for part(s) 
and S/H both ways for out of warranty parts.

All Sales Policy:

All sales are final, No return, no exchange ,No refund for any reason.

Changes ,Errors /Inaccuracies:

www.coolster.com reserves the right to update or modify these Terms/ Conditions at any 
time  without  prior  notice  ,improvements  to  products  may  result  in  unannounced  small 
changes to specifications and external appearance, We strive to list and advertise all text and 
product  information  as  accurate  as  possible  ,However  ,unforeseen,  typographical  errors 
,picture errors and inaccurate information on this website may occur, We reserve the right to 
correct any errors ,inaccuracies or omissions and to change or update information at any 
time without prior notice, including order that have already been submitted ,if such errors 
occur ,we apologize for any inconvenience.

Binding Agreement:

These Terms and Conditions, together with all Exhibits to these Terms and Conditions form a 
binding agreement( the .Agreement) between the buyers and Maxtrade LLC.

Summary of Contents for ATV-3050C






























Reviews: