2
Safety Precautions
To operate your CoolWorks IceProbe Aquarium Chiller:
1. Read all instructions.
2. To protect against electrical shock, do not place cord, plugs, or appliance in water or other liquid.
3. Do not operate this device with a damaged cord or plug or if the device malfunctions. Return device to the factory for
examination, repair or adjustment. See Warranty.
4. Do not use outdoors or in damp area.
5. Do not let cord hang over edge of table or counter, or touch hot surfaces.
6. Do not use device for other than intended use.
7. Provide four to six inches of air space around the fan and heat sink for air circulation.
8. Do not plug the IceProbe directly into a 120VAC power source (i.e. standard wall outlet). This device is intended to
operate at 12VDC and draws approximately 5 amps.
9. Only power the IceProbe with the power supply included with the device.
10. Do not attempt to service this product. Repairs should be done by authorized service personnel.
IMPORTANT:
!
When unpacking or installing the unit, do not scratch or chip the protective coating covering the probe.
!
Keep the IceProbe’s electrical components and Power Supply away from salt spray.
