Page 4
Door reversal
If you are planning to install the fridge side-by-side with the freezer (CZ51038IFZ) one of the doors must
be changed so both doors open towards the middle (Figure 2).
Changing the door opening might also be more convenient to fit in with the design of the kitchen.
1. Remove the door from top and bottom hinges by removing the screws (Figure 3).
2. Remove the hinges from the casing by unscrewing the hinge screws (Figure 4).
3. Gently prise out the blanking plugs from the casing on the opposite side where the hinges are to be
fitted. Fit the hinges in the corresponding positions on the opposite side of the door as shown by the
arrows in Figure 5 and refit the door the other way round.
FIGURE 3
FIGURE 4
DOOR
HINGE AND
SCREWS
HINGE AND
SCREWS
HINGE
SCREWS
HINGE
CASING
FIGURE 5
POSITION AND
REFIT THE
HINGES IN THE
OPPOSITE SIDE
AS SHOWN BY
THE ARROWS.
