Page 4
Door reversal
Door removal
1. Using a flat screwdriver or suitable tool, gently
prise off the hinge plate cover at the top of the
unit. (Figure 3).
2. Unscrew the hinge plate and lift it out of its fixing
holes. (Figure 3).
3. Using a flat screwdriver or suitable tool, gently
prise off the blanking cover, located on the
non-hinged side of the chiller. (Figure 4).
4. Support the door on both sides and remove it
from its bottom hinge by lifting it upwards and
away from the unit. Rest the door in a safe place
until it is required.
5. Unscrew the bottom hinge and pull it out of its
fixing holes and away from the unit. (Figure 5).
Door replacement or reversal
To replace the door, follow the above instructions
in reverse order.
If door reversal is required, replace the hinges at
the opposite side from which they were
unscrewed.
For ease of use, the door of the chiller can be reversed to open from the left or from the right.
FIGURE 3
FIGURE 4
FIGURE 5
