Revised: 10/05/2008
Printed: 22/04/2009
8
Baffle plate removal
The baffle plate is held in place with four locating tabs – 2 either side, front and rear of the firebox.
WARNING: ALLOW THE HEATER TO COOL IF HOT BEFORE ATTEMPTING BAFFLE
PLATE REMOVAL.
Cast Iron Baffles
MODELS: BWF, BWFA, MBWFA, MIDI,
CMF2, BWIA.
Removal of firebricks may be necessary if
fitted.
1. Lift the front of the baffle up and pull
forward over the supports until the
baffle clears the locating slots in the
back wall of the firebox.
2. Lower the rear of the baffle to drop
down and rest on the floor of the
firebox.
3. Lower the front of the baffle until it
clears the support brackets & remove it
from the firebox.
MODELS: CMI
1. Lift rear of baffle assembly.
2. Pull forward.
3. Lower to firebox floor & remove.
MODELS: CCF3 & CCI3
Lift the front of the baffle plate clear of the front supports.
Remove baffle plate by lifting up and forward and through the firebox opening.
The baffle plate should be removed and inspected annually and flaky deposits shaken or brushed off.
The most convenient time to maintain the baffle is when the flue is being cleaned.