www.cooperbussmann.com/wirelessresources
Cooper Bussmann 915U-2 Wireless Mesh I/O and Gateway User Manual
35
Rev Version 1.2.2
Figure 28 Installation Wizard
Starting MConfig
Follow these steps to start the MConfig Utility.
1. From the Windows
Start
menu, choose
Programs
-->
Meshing Config Utility
-->
Meshing Config Utility
.
The Project Selection screen appears.
Figure 29 Project Selection
2. Click one of the following options:
•
Re-open Previous Project
—Opens the last configuration project that was used on the PC. All configuration
project files are typically stored locally on the PC or on a network drive. The path to the last project used
appears below this button.
•
Open Existing Project
—Opens any previously saved project. This can be a project that was created on the
current computer or a configuration that was created elsewhere and sent to you. A dialog box will allow you
to navigate to the saved project that you wish to open.
•
Create New Project
—Start a new configuration project. You name the project and also specify the directory
location where the project is to be saved. The directory can be on the PC, on a portable drive, or on the
network.