Cooper Lighting Solutions
EG-2 9850-000776-01
3
Installation
Location
The EG2 should be installed in a dry ventilated
location, where ambient conditions are
maintained within the requirements of the unit.
The unit has ventilation slots on its sides to allow
convection cooling and in no circumstances
should these be blocked.
Mounting
Always mount in well ventilated location Allow
50mm (2”) above and below the unit if trunking
with a depth greater than 50mm (2”) is used.
Ambient atmosphere requirements
Temperature: +2°C to +40°C (+36°F to +104°F)
Humidity: 5% to 95% non-condensing
IP Rating: IP20
Weight:
0.25Kg (0.55 lbs)
Dimensions
Introduction
The Ethernet Gateway provides a connection
between an iCAN network and an Ethernet
LAN. This allows a user to control and
configure the iCAN system using iCANsoft on
a LAN network PC or via the internet rather
than by connecting directly into iCANnet
TM
.
Where a wireless LAN is in place (or by
connecting a wireless router into the Ethernet
Gateway) the user can access the network
with a Wi-Fi enabled PC running iCANsoft.
The Ethernet Gateway is also the host for the
iCAN series of remote applications including
iOS (iPhone®/ iPod touch®/ iPad®) and a
webserver front end where applications are
downloaded separately. Coupling the EG2 to
a WIFI network enables scene control, visual
feedback and modification from your hand
held device.
The Ethernet Gateway also facilitates
connection to the internet when used with
iCANsoft, a firewall, ISP and a Ethernet switch,
this then enables remote connection for
programming & obtaining diagnostics of the
lighting control system.
The built in astronomical timeclock feature
enables preprogrammed timed events for your
lighting system.
