- Fe Benefits
P R O D U C T S P E C I F I C A T I O N S
15
V I S I O N S I T E
A r c h i t e c t u r a l A r e a L u m i n a i r e
D I M E N S I O N S
VXS
6" [152 mm]
VXM
7" [178 mm]
VXS
13 1/2" [343 mm]
VXM
17" [432 mm]
VXS
23" [584 mm]
VXM
28" [724 mm]
VXS
5" [127 mm]
VXM
6" or 10" [152 mm or 254 mm]
H O U S I N G
One-piece, die-cast aluminum housing maintains a nominal 0.125" wall thickness. Integral reveal channels
along top surface of housing promote heat extraction and prolonged electrical component life. Solid cast
wall separates optical chamber from electrical area.
D O O R
One-piece die-cast door frame. Door frame opens in a toolless fashion via release of one (VXS) or
two (VXM) flush mounted toolless latches. Tempered 1/8" thick clear glass lens seals to door with
a weather-tight continuous gasket. Optical chamber is sealed against entry of dirt and moisture by
a continuous door mounted gasket which firmly compresses against optical enclosure walls.
L E N S
Impact resistant 1/8" thick tempered clear flat glass.
O P T I C A L S Y S T E M S
Choice of five (5) efficiency segmented optical systems constructed of premium 95% reflective anodized
aluminum sheet. Optical segments are rigidly mounted inside a thick gauge aluminum housing for superior
protection. All segment faces are clean of rivet heads, tabs, or other means of attachment which may cause
streaking in the light distribution. Optional high efficiency hydroformed reflectors available in VXM housing
only in four (4) distributions patterns. All reflector modules feature toolless removal, quick disconnect wiring
plugs, and are field rotatable in 90° increments. HID lamp sources in medium housing (VXM) optics feature
mogul-base lampholders while the small housing (VXS) optics feature medium-base lampholders.
A R M
One-piece extruded rectangular arm available in standard 5" (VXS), or 6", and 10" lengths (VXM). Internal
bolt guides allow easy positioning of fixture during installation to pole or wall surface.
S U S P E N S I O N M O U N T
[ N o t S h o w n ]
Die-cast cleat factory mounted to luminaire and finished in luminaire color. Stainless steel structural rod measures 1/2" in diameter and
is provided in luminaire finish color or optional natural finish. Product works in conjunction with accessory VXS 5" arm and VXM 10" arm.
INVUE poles provided pre-drilled for suspension mount option. See INVUE pole brochure for a complete selection of matching poles.
