Cooper Lighting Tribute, Brochure

DESIGN FEATURES

CONSTRUCTION

Rugged one piece die cast 
aluminum housing and door frame.
One piece silicone gasket protects
the optical chamber from 
performance degrading 
contaminants. One (1) stainless
spring latch and two (2) stainless
steel hinges allow toolless opening
and removal of door frame.

REFLECTOR

Choice of nine (9) high efficiency
optical distributions, including five
(5) segmented optical systems 
constructed of premium 95% 
reflective anodized aluminum 
sheet. Optical segments are rigidly
mounted inside a thick gauge 
aluminum housing for superior 
protection. All segment faces are
clean of rivet heads, tabs or other
means of attachment which may
cause streaking in the light 
distribution. Optical modules are
field rotatable in 90° increments 
and offered standard with mogul
base lampholders for 150 400W 
assemblies or medium base 
lampholders for 100W and below.

ELECTRICAL

Ballast and related electrical 
componentry are hard mounted to
die cast housing for optimal heat
transfer and operating efficiency. 
Optional swing down galvanized
steel power tray with integral 
handle and quick disconnects 
allows tray to be completely 
removed from housing providing
ample room for fixture installation
and maintenance.

MOUNTING

Extruded 8" aluminum arm features 
internal bolt guides for easy 
positioning of fixture during 
installation to pole or wall surface.
Standard single carton packaging 
of housing, square pole arm and
round pole adapter allow for 
consolidated product arrival to site.
Optional internal mast arm mount
accepts a 1 1/4" to 2 3/8" O.D. 
horizontal tenon, while 4 bolt 
clamping mechanism secures 
fixture. Cast in leveling guides 
provide ±5° vertical leveling 
adjustment.

FINISH

Housing and arm finished in a 
5 stage premium TGIC bronze 
polyester powder coat paint. 
Optional colors include black, 
grey, white, dark platinum and
graphite metallic. RAL and 
custom color matches available.

C O M P L I A N T

 Full Cutoff

D A R K   S K Y

FCO

ROTATIONAL FLEXIBILITY

Optical assemblies can be rotated in 90° increments, allowing for
manipulation of distribution orientation independent of fixture 
orientation.