CEAG Notlichtsysteme GmbH
59
Operating
Assembly and Operating Instructions
Automatic Test System AT-S
+
with STAR
+
Technology
8.4.4 Menu 4: “DLS/TLS setup”
Overview:
Main menu
Test & status menu
Block,reset
Basic settings
DLS/TLS Setup
Circuit setup
Luminaire setup
Memory card
Menu 4
Find DLS/TLS
Text assignments
TLS times
Selection of
menu options
with the keys
<ok>:
confirm selec-
tion
<Menu>: can-
cel and return
to the previous
menu (any
changes
entered are
saved)
<ESC>: cancel
and return to
the previous
menu (any
changes en-
tered are not
saved)
flashing input
prompt
Menu 4.1:
<ok>
<ok>: The search result is accepted;
the parameters will be used by the
CU S
+
for the controller
<Menu>: The search result is reject-
ed – the old settings are retained
When all possible addresses have
been polled the procedure is closed
and the system returns to menu 4
“DLS/TLS Setup” with the new para -
meters.
Finish and return to Menu 4 with
<Menu>
The procedure is necessary, for example
when the system is first commissioned
or after adding/removing DLS or TLS mo-
dules.
All addresses are searched in succession
for installed DLS and TLS modules.
The icon bar
indicates how
the search is progressing.
Menu 4.2:
<ok>
Line selection (line 2, 4) with
Select a bus address with
The message “DLS/TLS Text” appears
on line 4 as a default setting or, if already
defined, a module name
Editing DLS/TLS Text:
–
Select line 4 with
–
Select the input point with
–
All the possible alphanumeric char-
acters are displayed cyclically with
the cursor keys
.
–
Once a name has been fully entered,
confirm the entry with <ok>. The
remaining characters after the cur-
rent cursor position are cleared.
Finish and return to Menu 4 with
<Menu>
Find address:
n
O
Search result
Find address:
n
O
Search result
DLS+3Phase monit.
Menu=No OK=YES
If no external bus module is found, you will
see the message
Search result
not installed
If a bus module has been identified, you
will see the message ...
Search result
DLS+3Phase monit.
Search result
DLS module external
Search result
TLS module external
Search DLS/TLS ...
Text assignment
TLS times
Text assignments
DLS+3Phase monit.
N
o
DLS/TLS Text
Search DLS/TLS ...
Text assignment
TLS times
Notes:
You can use this menu to view assignments with
external modules and assign/edit module names
without changing the configuration.
These module names are stored on the memo-
ry card and displayed in the graphic display
menus as operator help. Text assignments can-
not be made with the CU S
+
if a memory card
is not inserted!
A more user-friendly input is possible using a
CEAG configuration software with a PC (data
are transmitted by the memory card).
Line selection (line 1, 2) with
Make changes in the input field with
When this menu option is selected the system
displays the first TLS module number it finds; in
the “Port” input field you can now select from
among the possible ports of the modules with
In line 2 the stairwell light operation times 1 sec,
1 ... 15 min can be selected with
Line 3 shows the module name (s. menu 4.2).
Finish and return to Menu 4 with <Menu>
Menu 4.3:
<ok>
Search DLS/TLS ...
Text assignment
TLS times
TLS:
N
o
Port:
N
o
Time 1 min
DLS/TLS Text
Summary of Contents for Ceag AT-S+ C0
Page 76: ...400 71 860 177 XXX 07 12 WK...
