SAFEPATH
®
4
Facility Communications
SP40S
Description
The
SP40S
is a Multi-Function Supervised Paging, Messaging,
Background Music delivery and Emergency Voice Evacuation
System with 24 VDC battery backup. This single channel
system is capable of delivering 40 watts of supervised
high
fidelity
audio power and 2 amps of supervised 24 VDC
synchronized strobe power. It comes standard with an
on-board digital voice messaging system with 8 standard
messages, a hand-held microphone, power supply/battery
charger and numerous additional features. The SAFEPATH4
system is expandable to 5280 watts utilizing the SPB-80/4 (80
watts and 4 amps of strobe power), the SPB-160 (160 watts)
or SPB-320 (320 watts) supervised audio power boosters. All
models available in 115 VAC ir 220 VAC.
Applications for the SP40S
• Multi-use applications—The system can function as an
evacuation system, an emergency messaging system,
a paging system, an employee notification system and a
background music system per NFPA 72 (2002), section
6.8.4 Combination Systems
• Fire code applications—The system is listed under UL
Standard 864, 9th edition delivering supervised audio and
voice messaging with strobes and notification appliance
circuits (NAC) for visual alerting
• Economic OSHA applications—The system is OSHA
1910.165 compliant; this means that it does not require
reliability inspections every two months, or the required
spare parts inventory
• Wide ranging applications—from small to large facilities
•
Can connect to pagers for private alerting of emergency/
trouble conditions
System Activation
•
Contact closure message activation
Approvals & Compliance
• Approvals: UL Standard 864, 9th edition, UL Standard 1711,
California State Fire Marshal (CSFM), New York City (MEA),
FCC Part 15
• OSHA 1910.165 and ADA Compliant
• 3 Year Warranty
•
Made in the USA
Background Music
• Capable of broadcasting from a supplied BGM source
•
Unique supervision method allows for full system supervision
even during background music (BGM)
• Line Level input for music source
• Frequency Response 100 - 15KHz
Strobe Inputs and Activation
• 2 Amps of 24 VDC supervised strobe power with built-in
Wheelock sync protocol. Power limited.
• Strobe output is selectable for control of Wheelock sync
protocol or non-sync operation
• Strobe terminals have pass thru capability for Wheelock sync
or non-sync operation
• Any of the 8 messages can be dip switch selected to activate
strobes
• Microphone activation can be dip switch selected to activate
strobes
• Auxiliary activation (Remote MIC) can be dip switch selected to
activate strobes
• 24 VDC supervised and synchronized strobe power can be
expanded to meet the requirements of the installation via
General Paging
•
Easily interfaces with most existing phone system page port, CO
port and line level signals
• Automatically mutes BGM
• Frequency Response 275 - 6.5kHz
• Night ringer or security alert connection
Voice Evacuation
• Complies to NFPA-72 requirements
• Supervised NAC speaker and strobe circuits
• Live microphone override
• 8 digitally pre-recorded voice messages
• Uses selectable pre-tones for messages
Speaker Output
• 40 watts of supervised audio power
• Speaker outputs: 25V or 70.7V power limited
Features
2