Planning the Installation
TSE55-B is designed to be wall mounted or in
either Portrait or Landscape orientation.
TSE55-B requires a minimum mounting depth
of 1in (2.45cm) from the front wall surface
plus room for cable/s. Power is supplied by
Power Over Ethernet (PoE). PoE must meet
the IEEE 802.3af standard. TSE55-B connects
to the local network via a hard wired Ethernet
connection.
Installation
TSE55-B has been designed to mount to a Standard
UK single gang back box, a standard European
single gang back box as well as a standard US
NEMA single gang back box. Minimum depth:
47mm
The mounting frame, included with this unit, should
be attached to the back box using the screws
supplied with the back box.
Installing the mounting frame
TSE55-B includes a mounting frame that must be
used for this installation.
Using the screws supplied with the backbox, mount
the mounting bracket onto the back box
Mounting height
The recommend mounting height for the
TSE55-B is 57 - 64in (145-165cm) above the
finished floor to the center of the unit.
Overview
Back Box
TSE55
Mounting Bracket
PoE and Data Connection (RJ45)
UK
EURO
NEMA
57” / 145cm
64” / 165cm
