background image

Specifications

Dimensions: 5.8” (148mm) W  x  3.42” (87mm) H
Mounting depth: 0.86” (22mm)
Display: 5.5” (139.7mm Diagonal)
Resolution: 1280 x 720
Network: 10/100/1000 Ethernet
Connections: LAN/PoE RJ-45
Power Requirements: 
Via PoE: IEEE 802.3af, 13W maximum draw  

(@48 V 270 mA max)
or
Via PSU: 24V DC @ 0.5A

Removing the TSE55-B

Loosen the 2 captive screws on the TSE55-B and 

pull away from the mounting frame to disengage 

the unit.

Document:  TSE55-B     9850-000655-04

All products manufactured by Cooper Lighting Solutions and identified with the iLight product series mark are warranted to be free from 

defects in material and workmanship and shall conform to and perform in accordance with Seller’s written specifications. For detailed warranty 

information, contact Cooper Lighting Solutions.
This warranty will be limited to the repair or replacement, at Seller’s discretion, of any such goods found to be defective, upon their 

authorized return to Seller. This limited warranty does not apply if the goods have been damaged by accident, abuse, misuse, modification or 

misapplication, by damage during shipment or by improper service.
There are no warranties, which extend beyond the hereinabove-limited warranty,  

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS. 
No employee, agent, dealer, or other person is authorised to give any warranties on behalf of the Seller or to assume for the Seller any other 

liability in connection with any of its goods except in writing and signed by the Seller. The Seller makes no representation that the goods comply 

with any present or future federal, state or local regulation or ordinance. Compliance is the Buyer’s responsibility.
The use of the Seller’s goods should be in accordance with the provision of the National Electrical Code, UL and/or other industry or military 

standards that are pertinent to the particular end use. Installation or use not in accordance with these codes and standards could be hazardous.

FM 664349

Cooper Lighting Solutions

Usk House, Lakeside, Llantarnam Park, 
Cwmbran, NP44 3HD, UK 
t: +44 (0)1923 495495       e: info@cooperlighting.co.uk 
www.cooperlighting.co.uk

Summary of Contents for TSE55-B

Page 1: ...is product IMPORTANT Read carefully before installing product Retain for future reference NOTICE Product may become damaged and or unstable if not installed properly Note Specifications and dimensions subject to change without notice ATTENTION Receiving Department Note actual product description of any shortage or noticeable damage on delivery receipt File claim for common carrier LTL directly wit...

Page 2: ...ox a standard European single gang back box as well as a standard US NEMA single gang back box Minimum depth 47mm The mounting frame included with this unit should be attached to the back box using the screws supplied with the back box Installing the mounting frame TSE55 B includes a mounting frame that must be used for this installation Using the screws supplied with the backbox mount the mountin...

Page 3: ...5E or CAT6 Ethernet cable from the network switch to the LAN PoE jack on the back of the TSE55 B Connecting Ethernet When not utilizing a PoE switch it is recommended that you connect the TSE55 B to a network switch via a PoE injector Utilizing a standard CAT5E or CAT6 network Ethernet cable connect to the LAN PoE jack Connecting to the lighting network TSE55 B connects to the lighting network usi...

Page 4: ...he goods have been damaged by accident abuse misuse modification or misapplication by damage during shipment or by improper service There are no warranties which extend beyond the hereinabove limited warranty INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS No employee agent dealer or other person is authorised to give any warranties on behal...

Reviews: