Solar Buddha
G496
Instructions for Use
Please read and retain these instructions for future reference
v001: 04/11/19
How the Solar Light Works
The solar light will work automatically charge by day and illuminate at night.
Solar lights should be installed in an area that receive the most direct sunlight and is free from cover or
shade to allow the solar lights to be charged as much as possible
Positioning the Solar Light
Locate outdoors in direct sunshine, where the solar panel can receive at least 6 hours of sunshine each day.
Shady locations will influence the battery charge and may shorten the working time of the light at night time.
The Solar Light should not be placed near external lighting such as street lights, which may affect the
activation of the internal sensor once it becomes darker.
The solar light is ideal for night time lighting of garden decks, lawns, patios.
CAUTION: Install lights where they will not create a trip hazard or cause an obstruction
How to use the Solar Light
1.
Prior to initial use, the solar unit should be exposed to
sunlight for at least 8-12 hours to fully charge the battery.
2.
Push the switch to the OFF position when charging for the
first time.
3.
Find a location in direct sunlight and generally free from
cover or shade.
Once sufficiently charged push the switch button to the
ON position.
4.
At night the solar light will automatically turn on.
5.
Ideally align the solar panel to face the midday sun to
maximize charging.
Fig. 1
Cleaning
To maintain maximum illumination always keep the solar panel clean and free from dust and debris. If
cleaning is required, please use a soft damp cloth or paper towel.
Never try to disassemble the solar light. The LED light is not replaceable.
Dimensions:
28.5cm x22.5cm x38cm
Material:
Resin
Contains 1.2V 200mAh Ni-MH AA Rechargeable battery
LED lights not replaceable
