Oil does not come out
Check oil for sub-standard quality.
Replace.
Check oil passage and ports for clogging.
Clean.
Chain problems
Poor cutting performance.
Blunt saw chain.
Sharpen or replace the saw chain.
Chain tension.
Check chain tension.
Saw chain fitted incorrectly.
Check saw chain direction.
Chain jumps off guide bar.
Chain tension.
Check chain tension.
Chain works with difficulty, Chain tension.
Check chain tension.
or does not move.
Chain becomes hot.
Chain lubricant.
Check oil level. Check chain lubrication.
When your unit seems to need further service, please consult with your dealer in your area.
Troubleshooting Guide
STORAGE
If storing Pole Pruner for more than 30 days, follow steps below.
• Remove and clean guide bar and chain. Clean guide bar and chain by soaking
in petroleum based solvent or mild soap and water mixture.
• Dry guide bar and chain.
• Place chain in container filled with oil. This will prevent rust.
• Wipe a thin coating of oil over surface of guide bar.
• Wipe off outside of Pole Pruner body. Do this with soft cloth dampened with a
mild soap and water mixture.
Store Pole Pruner
• In a high or locked place, out of children’s reach.
• In a dry place, indoors, frost free.
• With scabbard over guide bar.
TRANSPORTATION
Always transport with the blade covered. Ensure the unit is upright so that the oil
will not spill out. Ensure the unit is in a secure place where children can not
reach or access.
GUARANTEE:
This product is designed for domestic use only and guaranteed as such against
faulty workmanship for a period of 12 months from date of purchase. Your
statutory rights remain unaffected.
