!
SAFETY INSTRUCTIONS
BEFORE STARTING THE ENGINE
1. The area within a perimeter of 50ft (15m) of the person
using the unit should be considered a hazardous area
into which no one should enter. If necessary yellow
warning rope or warning signs should be placed
around the perimeter of the area. When work is to be
performed simultaneously by two or more persons, care
should also be taken to constantly look around or
otherwise check for the presence and locations of other
people working so as to maintain a distance between
each person sufficient to ensure safety.
2. Check the condition of working area to avoid any
accident by hitting hidden obstacles such as stumps,
stones, cans, or broken glass. Remove any obstacle
before beginning work.
IMPORTANT
Remove obstacles before starting work.
3. Inspect the entire unit for loose fasteners and fuel
leakage. Make sure that the cutting attachment is
properly installed and securely fastened.
4. Always use the shoulder strap. Adjust the strap for
comfort before starting the engine. The strap should be
adjusted so the left hand can comfortably hold the
handlebar grip approximately waist high.
STARTING THE ENGINE
1. Keep bystanders and animals at least 50ft (15m) away
from the operating point. If you are approached,
immediately stop the engine.
WARNING
Never place the throttle into the high speed position
when starting the engine.
3. After starting the engine, check to make sure that the
cutting attachment stops rotating when the trigger is
released. If it continues to rotate turn off the engine
and take the unit to your dealer for repair.
!
!
USING THE PRODUCT
IMPORTANT
Cut only materials recommended by the manufacturer. And use only for
tasks explained in the instructions.
1. Grip the handle firmly. Place your feet slightly apart (slightly further apart than
the width of your shoulders) so that your weight is distributed evenly across
both legs, and always be sure to maintain a steady, even posture while
working.
2. If the unit starts to shake or vibrate, turn off the engine and check the whole
unit. Do not use it until the trouble has been properly corrected.
3. Keep all parts of your body away from rotating cutting attachment and hot
surfaces.
4. Never touch the engine is in operation or immediately after shutting down the
engine. Doing so could result in serious burns or electrical shock.
!
GETTING STARTED
Unpacking
Remove all items from carton.
Check all items for any shipping damage. If you find any damage or if any
parts are missing, promptly inform the dealer where you bought the Pole
Pruner.
Accessories
The Pole Pruner comes with following accessories:
1. Saw Chain
1pc
2. Guide Bar
1pc
3. Hex Key
1pc
4. Bar Cover 1pc
5. Shoulder Strap 1pc
6. Handle
1pc
Release the bolt from the handle to free the guide bracket, place the guide
bracket over the shaft on the Pole Pruner and replace the bolt and tighten
according to where you want to position the handle. Fasten the bolt on the
handle securely. Attach the shoulder strap through the eyelet in the guide
bracket within the handle and adjust the strap accordingly to take the strain of
the Pole Pruner.
