18
Warning
Before proceeding to your job, read
For Safe
Operation
section p7-8. It is recommended to first
practice sawing easy logs. This also helps you get
accustomed to your unit. Always follow the safety
regulations. The chainsaw must only be used for
cutting wood. It is not suitable for cutting any other
type of material. Vibrations and kickback vary with
different types of woods. Do not use the chainsaw
as a lever for lifting, moving or splitting objects. It is
not necessary to force the saw into the cut. Apply
only light pressure while running the engine at full
throttle. When the saw chain is caught in the cut,
do not attempt to pull it out by force, but use a
wedge or a lever to open the way. Do not fit any
other tools to the chainsaw or use for any other
purpose other than those specified in these
instructions.
Sawing
!
Good grip
positions
Correct
handle grip
Correct
distance
Incorrect
distance
Incorrect
handle grip
Clear of ground
when starting
motor
(F15)
GUARD AGAINST KICKBACK (F15)
This saw is equipped with a chain brake that will stop
the chain in the event of kickback if operating
properly. You must check the chain brake operation
before each usage by running the saw at full the
throttle for I – 2 seconds and pushing the front hand
guard forward. The chain should stop immediately
with the engine at full speed. If the chain is slow to
stop or does not stop, replace the brake band and
clutch drum before use.
It is extremely important that the chain brake be
checked for proper operation before each use and
that the chain be sharp in order to maintain the
kickback safety level of this saw. Removal of the
safety devices, inadequate maintenance, or incorrect
replacement of the bar or chain may increase the risk
of serious personal injury due to kickback and will
invalidate your warranty (F15).
