Rise & Recline Chair Massage 8 Point
G622
Instructions for Use
Please read and retain these instructions for future reference
v002: 22/05/20
Assembly
1.
If the back of your chair needs to be removed for transit please do the following:-
Recline the backrest slightly and then release the backrest by pulling the locking levers forward. The
locking levers are situated at the rear of the chair between the arm unit and backrest.
Lift the hook & loop backflap and tuck out of the way to ensure it does not reattach itself.
Standing behind the chair grasp the backrest at about the point where the backrest meets the arm
unit and pull evenly upwards and towards yourself.
After the chair has been moved replace backrest and ensure that it is locked securely in place by
pushing the levers back and reattaching the hook & loop.
Always check that the backrest has been located securely on the metal plates and is level and totally
secure before using the chair.
2
Lock until
click
3
Plug in adapter
