Section 5
15
Menu Function
5
Heat
The HEAT option is used for the heater to
turn on at a certain time
.
Note: This function only works in conjunction with St.St. If St.St is set to 8.00 and heat function
is on, the heater will automatically turn on at 8.00 using 24 hour clock.
Follow these steps to navigate in the HEAT menu.
Action
Key
Display
Press and hold UP+DOWN key for 3 seconds to
enter the menu.
The first menu “UNIT” will appear in the display.
Press DOWN key once and the menu “HEAT”
appears in the display.
Press and hold set-point key to change values.
While holding the set-point key in, press either
arrow UP or arrow DOWN key to select between
“ON” and “OFF”.
When the required setting is activated, let go of the
set-point key.
Press and hold UP+DOWN key for 3 seconds to exit
the menu.
Note: A dot will turn on in the right side of display, indicating that the Heat function is active.
h E A t
