3. Turn off the infinite loop function of all buttons
(请不要在有按键被锁定的状态下进入配置模式,例如 A 键处于无限循环状态,请再次按下 A
键退出此状态)
(Do not enter the configuration mode when a button is locked. For example, when
A is in the infinite loop state, please press A again to exit this state.)
1. 同时按下 HOME + 十字键上并松开,进入无限循环功能配置模式
1. Press the HOME+ Up of the cross button at the same time and release to enter
the infinite loop function configuration mode.
2. 按住 HOME3 秒钟,会自动清除所有已配置的无限循环功能,并自动退出配置模式
2. Hold down the HOME button for 3 seconds, all the configured infinite loop
function will be eliminated automatically, and it will exit the configuration mode
automatically.
3: 注意此按键依然处于连发模式,要解除连发状态,请参考相关教程
3: Notice that this button is still in the combo mode. To exit the combo state, please
refer to the relevant tutorial.
4.锁定按键
4. Lock button
按一下已开启无限循环功能的按键,此后按键被锁定在无限循环状态