9
►
BLC
▷
AREA: Control BLC area according to light condition.
▷
POS-X: Adjust the window X-Axis position
▷
POS-Y: Adjust the window Y-Axis position
▷
SIZ-X: Adjust the window X-Axis size
▷
SIZ-Y: Adjust the window Y-Axis size
z
When WDR is ON, ACE and DEFOG function will be off.
◈
DAY & NIGHT: Select Day & Night
1. D&N Model
►
AUTO / DAY / NIGHT / EXT
▷
Delay: 0 ~ 255 second
▷
BURST: OFF / ON
▷
THRS: (LOW / MIDDLE / HIGH)
According to daytime, nighttime setting the levels of transition sets to no
changes when it is dark at, higher the step it is set to
▷
GAP: LOW / MIDDLE / HIGH
This setting adjusts the margin of change from the setting of light to dark /
daytime to nighttime and dark to light / nighttime to daytime. If this setting is
too low then fluctuation may occur.
2. COLOR Model
►
AUTO / DAY / NIGHT / EXT
▷
Delay: 0 ~ 255 second
▷
BURST: OFF / ON
▷
THRS: LOW / MIDDLE / HIGH
▷
GAP: LOW / MIDDLE / HIGH
3. IR SMART Model
►
AUTO
▷
Delay: ---
▷
BURST: OFF / ON
▷
THRS: ---
▷
GAP: ---
4. IR CDS Model
►
AUTO / DAY / NIGHT
▷
Delay: ---
▷
BURST: OFF / ON
▷
THRS: ---
▷
GAP: ---
◈
SMART IR: OFF / ON
▷
THRS: Set-up Smart IR turns on point.
When you level up the value, Smart IR turns on in a low light condition.
*SMART IR function only works with IR Smart Model.
