background image

9

Function Switch Settings 

AWB / ATW

The camera has two settings, AWB (Auto White Balance) and ATW (Auto Tracing White 
balance) ABW will set white objects white according to the colour temperature at the time. 
ATW automatically tries to keep white objects as white even if the colour temperature of the 
light changes. For most applications, ATW is the recommended setting.

AGC (Automatic Gain Control)

When AGC is selected, this increases the amount of amplifi cation applied to the video 
signal to allow the signal to maintain a constant level in low light conditions. 

MIR (Mirror)

The image viewed can be set to display as a mirrored image (horizontally fl ipped) when 
output to the DVR, monitor, mux etc.

BLC (Back Light Compensation)

When BLC is selected, the camera tries to compensate for the bright part of an image, e.g.  
an outside widow, so that the surrounding area is not too dark.

ELC / ALC

The ELC/ALC switch is used to select Electronic Light Compensation or Automatic Light 
Compensation. ELC is used for external auto iris lenses. ALC is used for internal auto iris 
lenses. 

DAY / D/N

The day/night dome cameras include a switch to select having the day/night feature turned 
on or off. 
If D/N is selected, the camera changes to monochrome mode during low light conditions 
and the resolution and sensitivity increase.

DSS (Digital Slow Shutter)

With DSS selected the camera has a longer exposure time, enabling the camera to operate 
in minimal light conditions. 

DC Level Adjust

The potentiometer next to the DIP switches is used to adjust the DC level for autoiris. 
Use a small screwdriver to open and close the iris to regulate the light extremes. 
Turning clockwise opens the iris wider, allowing in more light.

15-CD35F | 15-CD35VA  

15-CD45F | 15-CD45VA | 15-CD45HVA

BLC

MIR

AWB

OFF

AGC

ATW 

1 2

OFF

OFF

3 4 5 6

OFF

BLC

ATW

AGC

ALC 

 ELC

 AWB

OFF

1

3

2

DSS

D/N

OFF

DAY

MIR

OFF

6

4 5

7

Summary of Contents for 15-CD35F













Reviews: