12
1. Basic recording method
Press [Record] button ( ), then recording icon ( ) is displayed on the top of screen.
If DVR system is booted again, it is not necessary to set recording settings, because recording
setting remains unchanged and memorized.
Refer to SYSTEM SETUP-RECORD SETUP in this manual. (PAGE. 20)
2. FRZ (FREEZE)
If press [FRZ] button,
“
FRZ
”
is displayed on top left.
Then press number of channel you want to freeze. Picture of channel you selected is freezed,
and ( ) icon is displayed on the left of camera title.
Press [FRZ] button again to exit.
3. SEQ (SEQUENCE)
If press [SEQ] button in live display when it is in full screen of any channel, it shows full screen pictures
in rotation.
Rotation time interval can be set in SYSTEM SETUP-MISCELLANEOUS SETUP-TIMER SETUP.
4. ZOOM
If press [ZOOM] button in full screen of one of 16 channel, system enlarges this picture two times.
Using direction keys on the left of front panel, you can select area to be enlarged.
R 10.56%
P 9.34%
Current area of picture enlarged
Pictures of 16 channel are displayed in
rotation
Enlarged area moves whenever pressing
direction button, and continuous pressing
make it move faster.
Display of ZOOM
R 10.56%
P 9.34%
L
R
CH-01
T
B
3-3. Recording
3. Operation
F
Channel rotation in full screen
15
1. Basic operation
a.In the picture on the right, represents 10.56% of total HDD space is spent for data recording, and next
playback will start from the point of 5.37% of total HDD space.
b. Press [Playback] button( ).
c. Playback will start at the point of 5.35% of total HDD space.
d. When [Stop] button( ) is pressed at the point of 9.34%,
DVR system memorize it(Memorize stop point of last playback).
e. If press [Playback] button( ) again, playback starts from
9.34 %(stop point of last playback).
f. When playback proceeds up to 10.56% of total HDD space,
playback is stopped.
g. If press [Playback] button( ), playback starts again from the
end of data in reverse direction.
h. If press [Stop] button( ), system goes to live display mode.
Unless you press [RECORD] button, DVR system does not
record.
2. Example of operation
a. If press [Playback] button( ) shortly, DVR system starts to replay.
b. If press [Playback] button( ) once again, direction of playback is reversed.
c. If press [Playback] button( ) in long time when DVR system is in stop mode, you can enter GOTO MENU.
d. Then you can select search by percentage, by time, and by event in GOTO MENU.
2002 / APR / 01 PM 01: 00: 00
1
R 10.56%
P 5.37%
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
1
3. Search
When DVR system is in stop mode, press [Playback] button( )
for a couple of seconds, and you can enter into GOTO MENU.
2002 / APR / 01 PM 01: 00: 00
1
Basic display of GOTO menu
R 10.56%
P 5.37%
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
[GOTO MENU]
> PERCENT
TIME/DATE
EVENT LIST
[PERCENT GOTO]
Start
End
2002 / 04 / 01 10 : 20 : 11
2002 / 04 / 01 13 : 00 : 00
RECORD
…………
1 0 . 5 6%
PLAY
………………
._ _ _ _ %
[TIME/DATE GOTO]
Start
End
Target
2002 / 04 / 01 10 : 20 : 11
2002 / 04 / 01 13 : 00 : 00
2002 / 04 / 01 11 : 50 : 00
[EVENT-LIST GOTO]
0 2002 / 04 / 01 10 : 20 : 11 M03
1 2002 / 04 / 01 13 : 00 : 00 M07
2 2002 / 04 / 01 11 : 50 : 00 M11
Select
, Play or Stop
>
Using buttons from 1 to 10, set
percentage from which you want
to search, then press [ENTER]
button. Time corresponding to
the percentage you set is
displayed, and you can search
by pressing [PLAYBACK] button.
Using [Left] and [Right] buttons,
move to locations you want, and
set values using [Up] and
[Down] buttons.
Then press [Playback] button,
and playback starts from the
time you set.
Event list includes information
about motion, alarm, and
camera loss. Using direction
buttons, select event you want to
search, and press [Playback]
button to search.
M : motion , A : alarm, L: loss
M11 : Motion detected at ch #11
1
3-4. Playback
____ / __ / __ __ : __ : __
Target
3. Operation
Basic display of playback
15-DVR16SAE-LAN
15-DVR16SAE-LAN
ALL ABOUT IMAGE RECOGNITION & PROCESSING
ALL ABOUT IMAGE RECOGNITION & PROCESSING
