6. P/T (PAN/TILT)
You can connect PTZ camera or speed dome camera to DVR unit, and you must input protocol of camera to control
camera while you see live pictures, using buttons on the front of DVR unit or remote controller.
a. Basic control button : ENTER - Transmit COMMAND while pressed
UP/DOWN - Selection of menu item
LEFT/RIGHT - Select Command
For details, refer to SYSTEM SETUP-MISCELLANEOUS-PAN/TILT CMD SETUP.
b. Operation : 1. Press [P/T] button.
2. Select device (PTZ camera) using [UP] and [DOWN] buttons.
3. Select Command using [LEFT] and [RIGHT] buttons.
4. After completing input protocols of PTZ camera, press [P/T] button to exit.
5. PIP (PICTURE IN PICTURE)
While you see picture of specific channel in full screen, you can see small size pictures of remaining channels in
rotation, if you press [PIP] button. Time interval of PIP (small size picture) can be set in SYSTEM SETUP-
MISCELLANEOUS-TIMER SETUP.
If press [SEQ] button while it is in PIP mode, picture in full screen and PIP (small size picture) are all rotate.
Full screen of selected channel
PIP (small size pictures) rotates
in time interval already set
CH-1
CH2~CH16
Display of PIP
13
3. Operation
Notice : Maximum numbers of PTZ camera can be connected to DVR unit is 4.
14
a. TIMER recording : Recording by time ( at set recording rate, fields/sec)
8. Cautions
1) When you are in SYSTEM SETUP, recording is stopped.
2) While DVR system is in playback mode, recording is stopped.
3) No recording is done in channel to which you did not connect camera.
Example : Record all images at set recording rate(fields/sec) and overwrite when HDD is full.
7. Record setting
1. Log-in to SYSTEM SETUP.
2. Mover to RECORD SETUP and enter.
3. Using direction keys, set as figure-a.
b. MOTION recording : Recording when motion is detected (MOTION DETECTION)
Example : Just record for 30 seconds whenever motion is detected, and stop recording when HDD is full.
RECORD SETUP
RECORD TYPE
OVERWRITE
TIME INTERVAL
REFRESH RATE
DURATION
EVENT OFF TIMER
: TIMER
: ON
: 1/1X
: _ _ _ _ _ _
: _ _ _ _ _ _
: _ _ _ _ _ _
SELECT
, PRESS
a. TIMER recording
RECORD SETUP
RECORD TYPE
OVERWRITE
TIME INTERVAL
REFRESH RATE
DURATION
EVENT OFF TIMER
: MOTION
: OFF
: 1/1X
: 20 SEC
: 30 SEC
: 60 SEC
SELECT
, PRESS
b: MOTION recording
1. Log-in to SYSTEM SETUP.
2. Move to RECORD SETUP and enter.
3. Using direction keys, set as figure-b.
c. ALARM recording : Recording when alarm is activated
Very similar to MOTION recording
For details, refer to RECORD SETUP (PAGE. 20) in this manual.
3. Operation
R 10.56%
P 9.34%
TIME INTERVAL : Images from cameras are coming every 1/60 sec in NTSC system and 1/50 sec in PAL system,
1/1X : Records at all images from all cameras at a time interval of 1/60 or 1/50 second
according video system.
1/2X : Records images from all cameras at a time interval of 2/60 or 2/50 second
according to video system.
TIME INTERVAL represent recording rate, however it practically indicates if it
records images at time interval of switching time, at time interval of double of
switching time, at time interval of triple of switching time, and so on.
respectively, and it is switching time.
15-DVR16SAE-LAN
15-DVR16SAE-LAN
ALL ABOUT IMAGE RECOGNITION & PROCESSING
ALL ABOUT IMAGE RECOGNITION & PROCESSING
