25
3. Operation
15-VP04-HDD2 & 15-VP04-CDRW
PANTILT COMMAND SETUP : When PTZ camera whose protocol is already incorporated into this DVR system (Default
PTZ camera) is connected to this DVR, just select model of PTZ camera in PANTILT
COMMAND SETUP.
HDD INFORMATION
5
4
HDD DATA LIST : Shows general information of HDD.
HDD AUTO DETECT : Allows to detect HDD just in case first HDD search failed.
1
2
3. NOTE for scheduled recording :
When scheduled recording is set, DVR unit does not record before the set time. It only starts recording at START time
01:00-03:00 ON
04:00-05:00 ON
1
2
3
Just record from 1 to 3 and from 4 to 5, and does not record for the rest hours.
01:00-03:00 OFF
04:00-05:00 OFF
Not record from 1 to 3 and from 4 to 5, and records for the rest hours.
01:00-03:00 ON
04:00-05:00 OFF
Just record from 1 to 3 (When both ON and OFF are set, priority is on ON.)
and ends at END time.
PANTILT COMMAND SETUP
SELECT , PRESS ENTER
COMMAND LIST : PELCOD TYPE
485 RAUDRATE : 2400BPS
Display of PANTILT COMMAND
1. DRX-502A[DEFAULT]
2.AECD-2000
3.HID-2404
HMC-250
PELCOD SCC-641
SYSTEM SETUP
DISPLAY SETUP
CAMERA TITLE
TIME/DATE SETUP
ALARM/MOTION SETUP
RECORD SETUP
TCP/IP SETUP
MISCELLANEOUS
FACTORY DEFAULT
BUZZER SETUP
ID/PW SETUP
SCHEDULE REC
SETUP
PANTILT CMD SETUP
HDD INFORMATION
MARK IMAGE SETUP
PRODUCT ID
Procedure to control PTZ camera while you see live picture
Default PTZ camera : First select PTZ camera model connected to DVR unit in the PANTILT COMMAND SETUP menu. In
live view mode, press [P/T] button and set CAM (Starts from 000) at camera ID which is set on PTZ camera (DIP switch on
PTZ camera) before you connect it to DVR unit. Then select command you want to execute using [LEFT] and [RIGHT]
buttons. While you press [PLAY] button, command you selected is executed.
3
You can backup the recorder data by using CD-R media.
1) Search the data what you want to back up and check the start date and time.
2) Insert CD-R media into CD-RW drive.
3) Go into Setup Menu HDD Management CD-R Backup.
4) Set the start date and time in CD-R section.
5) Select the size of data. Then, end of the date and time will be changed as the size of data you choose.
6) Burn CD-R media.
If the burning is completed, CD-R media will come out automatically.
7) Please install AJP Player in your PC and execute AJP player. Insert CD into your PC and open CD data to Play it.
