18
DISPLAY SETUP
1.<CAMERA ID>
2.<ANGLE DISPLAY>
3.<PRESET LABEL>
4.<DOME LABEL>
5.RETURN
ANGLE DISPLAY
1.DISPLAY
ON
2.POSITION
TOP
3.RETURN
DISPLAY SETUP
1.<CAMERA ID>
2.<ANGLE DISPLAY>
3.<PRESET LABEL>
4.<DOME LABEL>
5.RETURN
PRESET LABEL
1.DISPLAY
ON
2.POSITION
TOP
3.RETURN
DISPLAY SETUP
1
CAMERA ID: when it is set at ON, address of
dome camera appears on the screen such as "CAM
001". The default setting is ON.
a) DISPLAY: to ON/OFF the dome address.
b) POSITION: to set the position of dome address,
there are four positions to be displayed: TOP-L (top-
left corner), TOP-R (top-right corner), BOTT-R
(bottom-right corner) AND BOTT-L (bottom-left
corner).
c) RETURN: to return to the DISPLAY SETTING
menu.
2
ANGLE DISPLAY: to enter the angel display
submenu.
a) DISPLAY: to ON/OFF the angle display.
ONEPUSH singly displayed, auto disappeared in 4
seconds.
b) POSITION: to set the display position of the
angle: TOP/BOTTOM.
c) RETURN: to return to the DISPLAY SETTING
menu.
3
PRESET LABEL: to enter the PRESET LABEL
submenu.
a) DISPLAY: to ON/OFF the display of the preset
label. If it is ON, the preset label will be displayed on
the left of the monitor when the preset position is
setting.
b) POSITION: to set the display position of the
preset label: TOP-at the top of the monitor, BOTTON-
DISPLAY SETUP
1.<CAMERA ID>
2.<ANGLE DISPLAY>
3.<PRESET LABEL>
4.<DOME LABEL>
5.RETURN
CAMERA ID
1.DISPLAY
ON
2.POSITION
TOP-R
3.RETURN
Setup of the Menu of the
Dome Camera
