21
MOTION SETUP
1.<PRESETS>
2.<AUTO SCAN>
3.<PATROLS>
4.<PATTERNS>
5.<CLEAR>
6.EDIT DOME LABEL
7.RETURN
PRESETE
1.PRESETS NO 01
2.EDIT LABEL
3.CLR LABEL
4.RETURN
PRESET NO: 01
LABEL:NO LABEL
CLOSE:EXIT
played on screen as the pictures: in the picture,
"PRESET NO" stands for NO.1 present position, the
topic is "NO LABEL". Using PANLEFT/RIGHT can
remove the cursor, TILT UP/DOWN can modify the
number, press the "CLOSE", exit edit mode and
save it. The topics of the present positions includes
10 characters at most, they are 0-9, A-Z, blank and
special characters including
〈
=
〉？，
@\+
、
-./
］
etc. Notes: the first letter must be from 0-9 or A-Z, in
case that, it stands for canceling the preset position
topic. When testing the preset position, it only dis-
play "NO.XXX", not display the toptic.
c) CLR LABEL: to clear the preset label.
d) RETURN: to return to the PROGRAM SETTING
submenu.
2
AUTO SCAN: to enter the Auto Scanning
submenu:
a) SCAN NO: to set the auto scanning number,
maximum is 03.
b) SPEED: to set the scanning speed for each patrol.
c) SET START LIMIT: to set the start position of the
scanning. After the user enter this item, to use the
joystick to move the dome camera and press
"CLOSE" to save the current position.
d) SET END LIMIT: to set the end position of the
scanning. After the user enter this item, to use the
joystick to move the dome camera and press
"CLOSE" to save the current position.
e) RUN SCAN: to run the scanning function, Please
AUTO SCAN
1.SCAN NO.
001
2.SPEED
001
3.SET START LIMIT
4.SET END LIMIT
5.RUN SCAN
6.CLEAR SCAN
7.RETURN
MOTION SETUP
1.<PRESETS>
2.<AUTO SCAN>
3.<PATROLS>
4.<PATTERNS>
5.<CLEAR>
6.EDIT DOME LABEL
7.RETURN
Setup of the Menu of the
Dome Camera
