Instructions for Catalina
Round/Square Extension Tables
Tools required
Components included:
Table top sub-assembly (1)
Lay the
table top sub-assembly
face
down on a soft level surface. Use a
Phillips head screw driver to remove
shipping blocks
under the
table top
sub-assembly
by detaching all the 2
”
screws
from the
shipping blocks
. Use
the provided Allen wrench to remove
the Leg Hub by detaching all four
¼” -
#20 x 35mm Allen bolts (
Figure 1
).
Step 1:
Remove the shipping blocks
Phillips head screw driver
Hardware included:
¼” - #20 x 35mm Allen bolts (4)
1
Figure 1
.
Remove the
shipping blocks and Leg Hub
from
Table top sub-
assembly
Cross nuts (8)
Table legs (4)
Unpack the table onto a
soft level surface and
identify the listed items.
¼” - #20 x 35mm
Allen bolt
Shipping
block
the
table top sub-assembly
Remove the
shipping blocks
and Leg Hub
Table top sub-assembly (1)
Table leg (4)
Catalina Round/Square Extension Tables:
48” Round/Square Extension Table
54” Round Extension Table
60” Round Extension Table
2” screw
4mm Allen wrench (1)
and the Leg Hub
Leg Hub
Allen wrench
1” screw
¼” - #20 x 50mm Allen bolts (8)
