Catalina Bed
assembly instructions
Notice: Beds must be disassembled before moving to avoid damage. Never attempt to move the bed while it is assembled.
Failure to do so would void the warranty.
Your Catalina bed
is delivered in four boxes.
Unpack the bed parts onto a soft, level surface in the space where the bed is to be
used. Lay out the headboard, side rails and footboard in their approximate locations.
Tools required for assembly
- Straight and right angle wrenches (included) and Phillips Head Screw Driver.
www.copelandfurniture.com
Footboard Assembly x1
Headboard Assembly x1
Platform Assembly x6
Side Rail Assembly x2
Hardware List
Threaded Rods (8)
Nuts (8)
Washers (8)
Straight Wrench
Right Angle Wrench
Packaged By
#10 x 1 1/2" Screws (12)
#8 x 1 3/4" Screws (3)
8.5” Support Blocks (40” Bed)
6” Support Blocks (37” Bed)
