- 30 -
Given the limited space of the screen, the message above will scroll across the
screen in order to show the full message.
You need to press the “ENT”/Enter button to return to the track selection menu. The
track selected that caused this error message will be de-selected automatically. Then,
you can select a different track with smaller playtime.
Step 6:
Once you have finished selecting the tracks on this Audio CD you want to mix, you
can press the
up or down button until you see “Are you done?” on the 2nd line as
in the following screen.
Step 7:
You can now press “ENT”/Enter button to confirm your selection. The system will
now start the mixing process as shown in the following screen.
Step 8:
Once the mixing process is completed, you will see the following screen:
When you’re finished adding tracks, you can choose to finalize the job (mark the completion)
by performing the following steps:
a) Press the “ENT”/Enter button when you see “Finish Mixing?” on the 2
nd
line of the
screen like below.
b) Then press the “ENT”/Enter button to submit, and you should see the following
confirmation screen:
Total: 6 Trk 26m:17s
Are you done?
Mixing... 1
10% 4m:31s
“1”
indicates
that
the
system
is
currently
transferring
track
one.
“10%”
indicates
that
the
current
transferring
progress
of
the
current
track,
track
one.
“4m:31s”
indicates
the
current
running
time
of
that
track.
Mixing Complete!
Finish Mixing?
Mixing Complete!
Finish Mixing?
Mixing Complete!
Confirm to Finalize?
