●
Install the bracket to the wall using a screwdriver and the appropriate
anchors for your type of wall.
●
Return the shelving unit to its position.
●
Insert the dowel pin through the wall bracket and the looped wire and
secure with the clinch pin.
●
Attach the metal plate on the other end of the wire to the module by
inserting the screw supplied in the package into the threaded slot on
the crosspiece.
Refer to our YouTube channel for more information on how to install the safety clip A:
https://www.youtube.com/channel/UCiz7cfWISKgjyNpUi03Eufw
.
Step 5—Metal rods, shelves and tray
●
Remove the pieces of tape located under the metal rods.
●
Facing the shelf, place the rear part of the shelf on the rear rod so that
the stoppers positioned under the shelf are in front of the rod.
●
Using your thumb and forefinger, pull the front rod slightly to engage the
support mechanism. Position the shelf in the center and repeat the
steps for the other 2 shelves as well as for the metal tray.
●
The stoppers under the shelves and the tray should be positioned
between the front and rear rod.
Watch our installation videos on YouTube for more details:
https://www.youtube.com/channel/UCiz7cfWISKgjyNpUi03Eufw
.
At coquo, your safety is our priority. It is very important to always follow the installation instructions and
to conform to the safety notice that is included in the package. These documents are also available free
of charge online at
6
