background image

23

NOTE

DECLARATION OF CONFORMITY

EU-Konformitätserklärung/ Déclaration de Conformité UE

(in accordance with ISO/IEC 17050-1) / (in Übereinstimmung mit ISO/IEC 17050-1)  /  
(Conformément à la norme ISO/IEC 17050-1) 

Description : 

1/8 DEMENTOR XP 6S - MONSTER TRUCK 4WD - RTR

 

Item Number: 

C-00167

This declaration is issued under the sole responsibility of the manufacturer. 
Die alleinige Verantwortung für die Ausstellung dieser Erklärung trägt der Hersteller.  
La présente déclaration est établie sous la seule responsabilité du fabricant. 

Product(s)/Produkt(e)/ Produit(s) : 

1/8 DEMENTOR XP 6S - MONSTER TRUCK 4WD - RTR

The object of declaration described above is in conformity with the relevant Union harmonization Legislation, specifically the 
requirements of the specifications listed below, following the provisions of the European RED Directive 2014/53/EU: 
Der Gegenstand dieser Erklärung ist konform mit den Harmonisierungsrechtsvorschriften der Europäischen Union, insbesondere 
mit den unten aufgeführten Bestimmungen, und folgt der europäischen RED Direktive 2014/53/EU: 
L’objet de la déclaration décrit ci-dessus est conforme à la législation pertinente en matière d’harmonisation de l’Union eu-
ropéenne, en particulier les exigences des spécifications énumérées ci-dessous, conformément aux dispositions des directives 
européennes RED 2014/53/EU:

EN 300 440 V2.1.1:2017 

EN 301 489-3 V1.6.1:2013 

EN 301 489-1 V2.1.1:2017 

EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013 

EN 62479:2010 

EN 55024:2010+A1:2015 

EN 55032:2015 

EN 61000-3-3:2013 

EN 61000-3-2:2014 

JSP GROUP INTL • Geelseweg, 80 • 2250 Olen • Belgium

Signed for and on behalf of/ Unterzeichnet für und im Namen von/ Signé pour et au nom de :  

Place/Ort/Lieu and Date/Datum/Data :  

Olen, Belgium, 05 August 2020 

Name/Nom: 

Stefan Engelen  

 

 

Signature/Unterschrift :

Title/Titel/Titre : 

Ceo

EQUIPMENT AUTHORIZATION

 is hereby issued to the named GRANTEE 

JSP GROUP INTL BVBA / CORALLY

, and is VALID ONLY 

for the equipment identified hereon for use under the Commission’s Rules and Regulations listed below.

FCC IDENTIFIER :  

2ASZJ-VP010005

Name of Grantee :  

JSP GROUP INTL BVBA / CORALLY

Equipment Class :  

Part 15 Low Power Communication Device Transmitter

Notes :  

VARIOPROP S2R

FCC Rules :  

15C

Frequency Range (MHZ) :  

2410.0 - 2480.0

FEDERAL COMMUNICATIONS COMMISSION

Summary of Contents for C-00167

























Reviews: