9
Select the vertical seals with the 12mm flipper (PN40095) and trim
to 1717mm.
Fit trimmed seals to both fixed panels,
seals must sit tight against
glass clamps (top and bottom).
Important:
Seal 'flippers' must be on inside of the enclosure.
Note:
Wetting the glass with water will help fit the seals.
Ensure sides are vertical.
Drill inside wall channels using 3mm drill bit where
shown. Do not drill too deep. Fix using 10mm screws
and screw caps.
8
5
ø 3
mm
10
Fit the door handles to the doors ensuring the plastic washers are fitted each side of the glass.
Inside
Inside
9mm
12mm
PN40095
Trim to
1717mm
10mm
PN60511
