7
Door adjustment:
The wheels at the top of the doors may need adjusting so that the doors slide freely and the magnetic seals
meet evenly when the doors are closed.
a:
From outside the enclosure and with the doors closed, adjust the screws on the top wheels. The bottom wheels should be
securely located in the bottom rail but the door must not be raised so high that the 'plungers' on the bottom wheels do not
operate.
b:
The 'plungers' on the bottom wheels can be pushed down to unclip the doors which will allow access to clean the doors and
fixed panels.
14
From inside
a
b
From inside the enclosure, position the top wheels into the top rail, push down the 'plungers' on both bottom wheels and position
into the bottom rails.
13
From inside
Top of doors
Bottom of doors
Adjust
from
outside
Magnetic
seals
