5
Push-fit the top caps onto the wall channels, Inline panel joint and corner post (as required).
Note:
The asterisk (
*
)
indicates caps that are supplied with the door / side panel.
6
a:
Position the strut/panel pivot onto the panel.
b:
Slide the panel pivot along the panel and fully insert into the wall pivot.
c:
Tighten the wall pivot grub screw onto the strut. Tighten the panel pivot grub screw onto the panel using a flatblade screwdriver and push fit the
cover cap (PN4745).
d:
Tighten the pivot screws using a flatblade screwdriver.
5
a
c
b
d
PN4745
Wall channel
& Side panel
Inline panel
& Door
Door &
Wall channel
Side panel
& Inline panel
*
*
*
*
*
*
