14
c
b
a
The 'cam adjusters' at the top and bottom of the doors may need adjusting so that the doors slide freely and the magnetic seals
meet evenly when the doors are closed.
a:
Loosen all 4 cam adjuster screws on each door (1 turn maximum).
b:
Turn the cam adjusters (by hand or using a 16mm
spanner) until the doors hang vertically. Re-tighten the screws -
do not over tighten
.
c:
Push fit all 8 covers onto the doors.
13
From inside
PN50103
Fit the door handles to the door ensuring the
supplied handle washers are used on each side of
the glass.
Chrome finish handle are supplied for all frame finish
options.
14
Push fit all 4 covers (PN60250) onto the middle
door stops on the top and bottom rails.
PN60250
15
PN60250
