2
3
a:
Place the wall channels on the tray ensuring they are vertical and an equal distance back from the front of the tray.
Place masking tape against the wall before marking drill hole positions, this will help prevent the drill bit slipping. Drill 6.5mm
holes, 30mm deep and insert the wall plugs.
b:
Apply sealant to the back of the wall channels.
c:
Fix the wall channels to the walls using 8 x 32mm screws and screw caps.
ø 6.5
mm
Inside
32mm
a
b
c
a:
Place the bottom rail onto the tray with its end mouldings inserted into the wall channels.
b:
Centre the bottom rail between the wall channels so that there is an equal gap at each end.
3
a
b
=
=
X
X = Door widths
1500 = 1450 - 1500mm
1700 = 1650 - 1700mm
