Choose a location where there is no heat source. Keep the refrigerator away from direct
sunlight or any other heat-producing appliance.
Choose a dry and well-ventilated space where there is no corrosive air.
TEST
Clean the parts of the refrigerator with lukewarm water on a soft cloth or with a neutral
detergent and with clear water, then wipe them dry.
Notes: Electrical parts of the refrigerator can only be wiped with a dry cloth.
Close the door and wait 30 minutes. If the temperature in the freezer compartment
decreases significantly, this indicates that the refrigerator system works well. When the
refrigerator operates for a certain amount of time, the temperature controller will automatically
set the temperature in conditions where the door is opened too often.
If the above steps are properly followed, the trial operations have been completed. The refrigerator
works normally.
DISPLAY
CONTROLS
Use your appliance with the following controls, your appliance has the corresponding
functions and modes as the control panels showed in the pictures below. When the
appliance is powered on for the first time, the backlight of the icons on the display panel
starts working. If no buttons have been pressed and the doors are closed, the backlight
will turn off.
-6-
5
Summary of Contents for ELLIPSE ERBM104S
Page 20: ......