-12-
remove the lower door.
and remove the middle hinge. Then
6. Loose screws used to attach the
slot of refrigerator body.
5.Switch the wire from the right to left
screws
1
1
4
2
3
4
1
3
2
1
1
3
2
8.Change screw hole covers on middle
cover plate from left to right (as shown
in figure below).
9. Place refrigerator flat, remove
part and then loose screws .
Remove part and part .
Lower hinge part (right)
Leg front
(
right
)
Leg front
(
left
)
Self-tapping-screws
10.Screw out lower hinge, change it to the
nearest hole site, and then screw in and
mount washer.
7.Place the lower door on a smooth
11. Remount in step 9, change
surface with its panel upwards. Loosen
part and part to the left and then attach
3
,detach part and part
them with screws .Change part
Turn part by180
°
and then install
to the right, and install it.
part and part to corresponding
position on left side together with
Lower hinge part (left)
screws .
12.Move the lower door and adjust its
position to align lower hole site and upper
hinge axis. Turn the middle hinge by
180
°
, change the washer on the axis to the
1
2
3
upper side, adjust the middle hinge to the
appropriate position and then install it.
5.Switch the wire from the slot of
the refrigerator body.
6. Loose screws used to attach and
remove the middle hinge. Then
remove the lower door.
11
Summary of Contents for ELLIPSE ERBM104S
Page 20: ......
