5. OPERATION
Keys Operation
The keys in the display layout are referred to in the following figure:
ġ
ġ
5.1
Display and description
SET button:
Press to change the refrigerator setting from 1 (cold) to 3 (coldest).
LED indicator lights:
Light up to show the current refrigerator setting.
5.2 Refrigerator Temperature Controls
Your refrigerator will automatically maintain the temperature level you select. The temperature control has three
(3) settings:
COLD
is the warmest setting,
COLDER
is the recommended setting,
COLDEST
is the coldest setting.
You can change the temperature setting amongst “
COLD
”, “
COLDER
” and “
COLDES
T” by pushing the “
SET
” button.
At first, set the panel to the “
COLDER
” setting and allow 24 hours before adjusting the temperature to your needs.
The power can be switched off by pressing the “
SET
” button for three (3) seconds and the “
OFF
” indicator light will
turn on. To switch the power back on, press the “
SET
” button again for another three (3) seconds.
5.3
Freezer Temperature Control
x
Your unit has one vent control for regulating the temperature in the freezer compartment. The temperature
control is located on the center of the freezer compartment’s interior back panel.
x
The first time you turn the unit on, adjust the temperature control knob to “
COLDEST
” and let the unit run
for at least two (2) hours before storing food inside. This will ensure that the freezer’s cabinet is thoroughly
chilled before food is put in.
x
The freezer temperature control ranges from "
COLD
" (the warmest) to "
COLDEST
" (the coldest). Adjust this
control to get the desired temperature. The recommended setting is ‘’
COLDER
’’ (halfway between “
COLD
”
and “
COLDEST
”).
22
Summary of Contents for ELLIPSE ERTM116W
Page 26: ... 3 ...
