Buzzer will bips for 30 seconds and the timer indicator
shows “- - “ when the setting time finished.
Hint:
a) Touch the “-“ or “+” control of the timer once to decrease or increase by 1 minute.
b) Touch and hold the “-“or“+” control of the timer todecrease or increase by 10 minutes.
c) If the setting time exceeds 99 minutes, the timer will automatically return to 0 minute.
b)
Setting the timer to turn one or more cooking zones off
Set one zone
Touch the zone you want to set
Touch the timer control,the timer indicator show “10”
Set the time by touching the “-“ or “+” control of the timer
Touching the “-“ and “+” together , the timer is cancelled, and
the will show ”--” in the minute display.
When the time is set, it will begin to count down immediately. The
display will show the remaining time and the timer indicator flash
for 5 seconds
EN-12
When cooking timer expires, the corresponding cooking zone will
be switched off automatically.
The display will show ”H” which means hot;
Note:
a)
The red dot next to power level indicator will illuminate indicating that zone is selected.
b)
If you want to change the time after the timer is set, you have to start from step 1.
c)
The method for setting two zones is the same as mentioned above.
