14
Fig. 2
Instructions for totally built-in
appliances
Dimensions of the recess
Height 1780 mm
Depth 550 mm
Width 560 mm
The appliance’s door has been locked in
position for transport by means of pins on
both sides. According to the door opening
direction, remove relevant pins at the top
and at the bottom.
For safety reasons, minimum ventilation must
be as shown in Fig. 2
Attention: keep ventilation openings clear of
obstruction.
Push appliance into the housing until stop strip
(A) touches the kitchen unit.
Fig. 3
50 mm
min.
200 cm
2
200 cm
2
min.
D567
A
D023
Instructions for totally built-in
appliances
Door reversibility (Fig. 1,a,b,c,)
The appliance is supplied with the right
door opening. To change the opening
direction of the door proceed as in the
following instructions before installing it.
1. Unscrew the upper pin and remove the spacer
2. Remove the upper door
3. Unscrew the pins (B) and the spacers (C) and
refit them on the middle hinge of the opposite
side. Snap the hinge cover (A).
4. Refit the upper door, the upper pin and the
spacer on the opposite side
5. Unscrew the lower pin and remove the spacer
and refit them on the opposite side.
Fig. 1a
Fig. 1b
Fig. 1c
B
C
A
